garbage - delete! 2

Overview

Description

This calibration does not apply to MultispeQ devices - only to a calibration jig used in factory testing. Never run this calibration on your device!

Part 2 of the calibration of the Light Box, a required tool for calibrating MultispeQ v1.0.

It includes:

  1. Calibration of the all lights (1 - 10) in the Light Box to PAR using two LiCOR PAR sensors attached to the Light Box.

Directions

  1. Remove the circuit boards from the Light Box, and reassemble inside a normal MultispeQ case.
  2. Connect to the PhotosynQ Desktop app.
  3. Install the #1 PhotosynQ LiCOR sensor onto the main body using the plastic main body attachment, and #2 sensor onto the clamp body using the clamp body attachment.
  4. Once installed, start the measurement.
  5. Then remove the PhotosynQ LiCOR sensors, and assemble the device such that the clamp and body are facing each other (as in the normal position). Once the clamp is closed, continue the measurement.
  6. Once complete, hit the save to device button and save button in that order to save to the device and website.
  7. Uninstall device from the MultispeQ case, and reinstall in the Light Box being careful to not break the board!

Protocols

v1.0 CALIBRATION: visible LEDs

Description

Each device has slight variations in the current output, and each LED varies in intensity by current. As a result, to ensure that every light outputs the same intensity given the same brightness setting, all lights must be calibrated to a known source. Visible lights (lights 1,2,3,4,and 6 which is green, red, orange, blue, and...

v1.0 CALIBRATION: IR LEDs

Description

Each device has slight variations in the current output, and each LED varies in intensity by current. As a result, to ensure that every light outputs the same intensity given the same brightness setting, all lights must be calibrated to a known source. Visible lights (lights 1,2,3,4,and 6 which is green, red, orange, blue, a...

Locations

Team

Thumb 012409 pbi 160 low low res headshot
Project Lead (1)